4.5mm Smart Led Track Light

4.5mm Smart Led Track Light

1. Lamps can be matched at will: 4.5mm led track light can meet a variety of spaces, it can be matched with a variety of lamps to meet our different needs.

2. You can add a light source at any time: because the commercial led track lighting is very easy to replace, so when you feel too bright, remove part of the lamp.
3. Low voltage safety: The maximum voltage of the magnetic rail used on the market will not exceed 48V, and the releasable touch light strip will not cause harm to the human body.

Advantage of UT16 Smart Led Track Light:

1. The voltage of the lamp is 24 volts. Low voltage, high safety or direct contact will not cause harm to the human body.

2. There are two modes of operation. Mode 1 switches between three different color temperatures. Intelligent dimming system (mode 2).

3. The thickness of the track is only 4.5mm, which can be cut arbitrarily and is suitable for various design schemes.

4. Improved safety lock design for more peace of mind.

5. You can DIY to create a comfortable environment with no ceilings, no embedding, and a range of light sources.

6. Buckle design, simple installation, more stable, the lighting can be tightly fixed above the track pole will not fall.

7. Complete installation accessories,track lighting kits , led track lighting heads accessories, cable storage boxes and other accessories to choose from, suitable for installation.

8. 2m/3m/4m/5m track light ,8 foot track lighting can be customized in length.

The 4.5mm magnetic LED track light is becoming more and more loved by consumers with its unique design and convenient installation. However, for those who are new to track lights, how to install and wire them can become a problem. We will provide you with a detailed guide to install and wiring the rail light to help you complete the installation work easily.

The tools we need to prepare are: rail lights, screwdrivers, electrical tape, wires, etc. Before you start the installation, make sure the power is cut off for safety.

Step 1: Determine the installation position

The installation location of the rail light needs to be determined according to your actual needs. In general, track lights can be installed on the ceiling, wall, or ground. If you choose to install it on the ceiling, you need to make sure that the load-bearing capacity of the ceiling is sufficient. If you choose to mount on a wall, you need to make sure that the material of the wall can withstand the weight of the track light. If you choose to install on the ground, you need to make sure that the ground is flat.

Step 2: Install the track

Wherever you choose to install the magnetic track light, you will need to install the track first. The installation method of the track is very simple, you just need to fix the track in a predetermined position and then fix the track with a screwdriver.

Step 3: Install the luminaire

First, fix the base of the rail light on the track, and then hang the light on the base. Please note that the luminaire should be kept at a distance from the track to prevent the luminaire from falling.

Step 4: Connect cables

First, turn off the power and then open the back cover of the light and find the connector. Connect the wires correctly according to the lamp instructions. Generally speaking, the red wire is connected to the live wire, and the black wire is connected to the neutral wire. When wiring, be sure to ensure that the joints of the wires are firm to prevent fire caused by poor contact.

Step 5: Test power-on

After the wiring is completed, we need to test whether the lamp can work normally. First, turn on the power, and then gently move the lamp to see if it can be normally adsorbed on the track. If all is well, then congratulations, the track light has been successfully installed and wired.

The installation and wiring of the  rail light is not complicated, and it can be easily done by following the above steps. However, since electrical safety is involved, it is important to pay attention to safety during operation, and if there is any doubt, it is recommended to have a professional electrician for installation and wiring.