When installing outdoor wall lights, for ip65 up and down lights and white up down outdoor wall light this kind of lights, we need to pay attention to the following key matters, to ensure that the outdoor wall lights can be used properly in the outdoor environment.
When the outdoor wall light (such as up down wall sconce outdoor) needs to be installed on a brick wall, make sure to pre-bury the wooden bricks in the process of laying the wall, this is a crucial step, and the use of wooden wedges to replace the wooden bricks is strictly prohibited. At the same time, you can also choose metal components as a fixed foundation. When installing the lamps, the lampstand should be firmly fixed on the wooden bricks or metal components to ensure that the lamps are stable during the use of the light source.
In addition, the installation of outdoor wall lamps should be combined with the wiring method to choose the appropriate type of switch. For open wiring, pull-wire switch is an economical and safe choice. For concealed wiring, it should be based on the wiring situation, such as the wall within the concealed wiring can choose embedded concealed keypad switch. The operating mechanism of these switches should be sensitive and light, and the action is completed by the instantaneous switching mechanism. At the same time, in addition to pull-wire switches and double-head switches, contacts on and off should be clearly labelled to facilitate user identification and operation. Outdoor wall lamps pull-wire switch pull cord should be selected insulated rope, the length of not less than 1.5 metres. The pull-wire mechanism and the pull rope should not be out of order when it is subjected to a force of 98N for 1 minute. In addition, outdoor wall light switch should generally be installed next to the door or other easy to operate position, in order to facilitate the user at any time to control and adjust the brightness of the lamps and lanterns and switch state.
