Magnetic tracks cannot be used universally. Magnetic tracks and lighting modules of different brands cannot usually be mixed, mainly for the following reasons:
Different voltage systems: Magnetic tracks of different brands may use different voltage systems, such as 48V and 24V, which makes the lamp holders and tracks incompatible.
Different wire systems: The wire designs of magnetic tracks may be different, such as wires on both sides and top wires. These design differences make it impossible to mix lamp holders of different brands.
Different lamp holder buckle and magnetic suction methods: The lamp holder buckle and magnetic suction methods of different brands may be different, resulting in the inability of lamps to be clipped into the track.
Different track width and thickness: The width and thickness of the track may be different, resulting in the inability of lamps to be clipped into the track.
Different transformer output: The output of the transformer may be different, which is also one of the reasons why lamps of different brands cannot be used universally.
Different copper core spacing: The copper core spacing of magnetic tracks of different brands may be different, resulting in different lamps used.
Different size and interface standards: The size and interface standards of magnetic tracks of some manufacturers are different, resulting in the incompatibility of lamps.
Therefore, in order to ensure the normal use and safety of magnetic track lights, it is recommended to purchase lamp heads and tracks from the same brand to avoid mixing between different brands.
