In the store lighting design, you will encounter a very common problem, that is: glare. So what is glare? Glare is often referred to as "blinding", it will make people feel dazzling, cause eye pain. The potential harm of glare is very great, when your store is empty, it is necessary to consider whether there is a problem with the lighting, because of the existence of glare, many customers are reluctant to enter your store, even if they go in, the atmosphere of the store gives people the feeling is not comfortable, but agitated, which mood to see the product?
What is the cause of the light glare?
1.The choice of lamps is wrong
Most of the causes of glare or lamps, lamps in the design did not do anti-glare treatment.
2.The lighting position is not scientific
You can't make bricks without straw, if there is a "good rice" but meet the "foolish woman"? Results: There is no doubt that there are anti-glare lamps, but the lamp cloth is unreasonable, and it will cause glare.
3.The number of lamps is too large, the brightness is too large
Many friends who run shops have always had an idea in their minds: a bright shop is better than a dark one, and a bright one will also attract people into the store. However, the reality is different, because when the brightness is too high, the cornea and lens of the eye will produce light scattering, also causing glare.
How to avoid glare in store lighting
That corresponds to the friend who is about to open a shop, how to avoid the appearance of glare in the store lighting? In fact, it is also very simple, we simple to popularize:
1.The use of anti-glare lamps
Lamp anti-glare is required to have a protection Angle, the protection Angle is the minimum value of the eye incidence Angle of the head-up observer at any position, and has the effect of limiting direct glare. Under normal horizontal sight conditions, in order to prevent direct glare caused by high-brightness light sources, the lamp must have at least 10°-15° shading Angle. In an environment with high lighting quality requirements, the lamp should have a 30° shading Angle.
In addition to the shading Angle, there is also a deep anti-glare plus cellular network to achieve anti-glare effect.
Such lamps, no matter which Angle you look at, will not produce glare! (The picture shows Shinhwa Lighting's new anti-glare track light)
2. Reasonable and scientific lighting position
What kind of lighting is scientific and reasonable? First of all, it must be clear that the lighting should be designed in accordance with the actual product layout, rather than a straight line design. If the product needs to change the position often, you can choose a larger adjustable Angle spotlight, taking the bedroom as an example, how to avoid glare? The lamp should be installed in the corresponding position on the outside of the bed and projected diagonally, so as to meet the effect of the bed being brightened and avoid direct glare.
3. The number of lamps is controlled within a reasonable range
Store lighting, not the more lights the better, but according to the actual product material, exhibition hall area, color, paint, to decide! Solid wood furniture a square with 7-8 watts, while upholstered furniture requires 10-12 watts, in accordance with this method, not only to meet the general lighting needs, but also to highlight the characteristics of the product, to create a light and dark alternate space atmosphere.
Speaking of which, in fact, it is very easy to avoid glare, as long as you choose a good lamp to do a reasonable cloth lamp design, it is almost inevitable. There may be dealer friends will ask: I have a light in the store, the lighting is good, there is glare, how to avoid it?
In fact, this to avoid glare is also very simple, is to add a control power can be achieved.
