Magnetic track lights are a relatively new lighting equipment that are magnetically attached to metal tracks and can be flexibly moved on the tracks to meet different lighting needs.
Here are the general steps for installing and wiring magnetic track lights:
Installation steps:
Prepare tools and materials: Make sure you have the tools and materials you need, such as magnetic track lights, metal tracks, screws, nuts, drills, screwdrivers, etc.
Select the installation location: Determine the installation location of the magnetic track light as needed. Make sure the track is installed at the appropriate height and location to meet your lighting requirements.
Install the metal track: Use screws and nuts to secure the metal track to the ceiling or wall. Make sure the track installation is smooth and secure.
Install the magnetic track light: Attach the bottom of the magnetic track light to the top of the metal track. Track lights will stay tightly attached to the metal track due to magnetism. You can move the magnetic lights on the track as needed.
Wiring steps:
Please note that wiring steps may vary by manufacturer and model, so be sure to consult the user manual for the magnetic track light you purchased and follow the specific instructions it provides before wiring it.
Disconnect Power: Before making any wiring, be sure to turn off power to the associated circuit to ensure safe operation.
Connect the wires: Typically, magnetic track lights will come with wires and plugs that you need to connect to the power cord. Depending on the color match, typically a black or blue wire goes to positive, a white or gray wire goes to neutral, and a green or chartreuse wire goes to ground.
Using connectors: You may need to use connectors (such as terminal connectors, screw terminals, etc.) to connect wires securely. Make sure the wire connections are tight and not loose.
Secure the wires: Carefully place the connected wires at the base of the track light so that they will not be disturbed by the magnets attached to the metal track. Avoid wires getting caught between the track and the lights.
Test connections: After connecting all the wires, double-check that all wiring is correct and tight. You can then turn the power back on and test the lighting function of the track lights to make sure everything is working properly.
Please note that since there may be differences between different brands and models of magnetic track lights, the above steps are for general reference only. Before proceeding with installation and wiring, be sure to carefully read the product's user manual and follow the specific instructions and safety precautions provided by the manufacturer.
