Downlight is a light that is more concentrated than ordinary open-mounted lamps, and is generally used for general lighting or auxiliary lighting.
Downlights in commercial lighting mainly provide uniform, comfortable and soft functional basic lighting, lighting is mainly considered when lighting spacing, illuminance and uniformity of the ground, as well as the matching degree of the lamp itself with the ceiling.
Installation of downlights:
Before installing the downlight, please check whether the size of the device hole can meet the requirements, whether the connection between the terminal and the power input line can be strong, whether the lamp and the device surface can be flat and fit, if there is a gap, please make appropriate adjustments.
When installing the ceiling downlight in the shopping mall, the installation hole in the upper part of the shopping mall can be opened in advance according to the required size, and then the power cord is connected to the wiring terminal of the lamp, pay attention to the positive and negative terminals, when the wiring is completed to confirm the installation, the spring card is erected, and the lamp body is inserted into the installation hole, and the LED downlight can be automatically spread in, connected to the power supply. The lamp can work normally.
Attention:
1. The downlight installation distance is not too close to the wall. The downlight will generate heat when lighting, if it is too close to the wall, it will bake the wall yellow, affecting the beauty of the room.
2. This lamp should avoid installation in the heat source and hot steam, corrosive gas places, so as not to affect the life.
