The lamp cup should be a round black electroplated reflective cup, which has a better focusing effect. The deeper the cup body, the better the anti-glare effect.
It cannot be too thin. Tracks below 2mm are easily squeezed and deformed. It cannot be too thick. The weight of the track above 2.5mm will increase the load-bearing pressure of the ceiling and may cause the ceiling to crack! Before buying, you can consult the weight of a one-meter track. It is recommended to be between 1300-1400g, which is better.
The track material is thickened aluminum, which is of good quality and not easy to deform.
The material of the lamp panel is the key to whether it is anti-glare. Compared with the PC panel, try to choose a micro-diamond panel, which has a better anti-glare effect of refracting light source.
The color rendering index of the magnetic track lamp is also very important. It can be done in one step without subsequent matching. The closer the color rendering index is to 100, the better. It is best to choose low blue light, which is less harmful to the eyes.
Double-group copper strips are more conductive than single-group. Red copper is better than brass in both ductility and corrosion resistance. Double sets of flat copper conductive strips are preferred.
Try to buy the same type of lamps in the same store, pay attention to after-sales service, and choose a store with a long warranty period, preferably one that can provide professional design.
