When using led track lighting, try not to switch on and off frequently. Because the lamp is frequently started at the moment, the current through the filament is greater than the current in normal operation, making the filament temperature rise sharply to accelerate sublimation, which will greatly reduce its service life. So I want to minimize the switch of led track light fixtures.
In the cleaning and maintenance should be careful not to change the structure of the lamp, and do not replace some parts of the led track lamp, after the end of cleaning and maintenance, the lamp should be installed as is, do not miss the installation, the wrong installation of the lamp parts; Replace the aging lamp in time according to the light source parameters provided by the sign, and find that both ends of the lamp are red, the lamp is black or there is a dark shadow, and the lamp is not bright, the lamp tube of the led track lamp should be replaced in time to prevent the occurrence of unsafe phenomena such as ballast burning.
