1. The magnetic lamp is generally low voltage, the voltage is 48v or 24v, 48v is most.
2. Some are cheaper and have higher voltage (you can save two power supplies), but this is too dangerous if placed on the wall.
3. The width of the track and lamps, the decoration of the house should not be too wide. Otherwise, the light surface of the lamp will be less than 20mm, because it is very thick and ugly, and the space of the lamp is only 23mm.
4. If it is hoisted, the track can glow up and down, so as to increase the sense of space, but the up and down luminous magnetic track has not been copied in China for the time being.
5. The selected track usually has a high/low and high track, the light can be placed on the same level with the track.```. Select lights, with surface light line lights. The walls are not too bright or too harsh. You can choose to fix it on top for lighting and make it brighter.
6. Track and track head coordination, this difficulty is large, so if it is not good, it is difficult to insert, it is difficult to pull out.
7. Under normal circumstances, the lamp is fixed on the track by magnetic force, but the magnet will be demagnetized at a specific time, and it will fall off without a buckle. With the manual buckle, it loses the meaning of magnetic attraction.
8. Choose magnetic track lights, and Gershan line lights, pay attention to anti-glare.
9. Construction, this is usually pre-filled, so you need to find a reliable worker. The track has a total of four wires, and the cost of using non-polar dimming is very high, because it needs to be replaced with a smart drive. And two-color lamp beads
