Magnetic lamps generally have low voltage, the voltage is 48v or 24v, with 48v being the most common.
Some are cheaper and have higher voltage (can save two power supplies), but these are too dangerous if placed on the wall.
The width of the tracks and lamps should not be too wide for house decoration. Otherwise, the light-emitting surface of the lamp will be less than 20mm, and since it is very thick and ugly, the space for the lamp is only 23mm.
If it is hoisted, the track can light up and down, which increases the sense of space. However, this magnetic track that shines up and down has not yet been imitated in China.
The selected tracks generally include high/low and high tracks, and the lights can be placed on the same horizontal line as the tracks.
Choose lights, linear lights with surface light. The wall is neither too bright nor too eye-catching. You have the option of attaching it to the top to illuminate and make it brighter.
The coordination between the track and the track head is very difficult, so if it is not done well, it will be difficult to insert and pull out.
Under normal circumstances, the lamp is fixed on the track by magnetism, but the magnet will demagnetize at a specific time and will fall off if there is no buckle. With the manual buckle, the meaning of magnetic suction is lost.
Choose magnetic track lights and grille linear lights, and pay attention to anti-glare.
