If you buy a magnetic lamp in your home, you need to think about how to install it. What is the specific installation method? Magnetic lamp manufacturers take you to understand it.
At present, there are three installation methods of magnetic lamp on the market: open installation, dark installation and suspended wire installation.
The operation method of open installation: it is necessary to measure the size in advance, and then find the parameters such as the embedded size of the lamp in the store, confirm the opening position and installation size, and select the corresponding lamps and accessories.
Then open the hole according to the size, reserve the drive line for the embedded track, take out the rear end cover, put in the accessories, connect the two ends after fixing the accessories, connect the corner connector, connect the power port install the fixing screws, install the anti-corrosion dust sheet, prevent debris from entering, then apply lime powder, paste seamless tape, spread a layer of lime powder, and finally brush paint to remove the decorative parts, the lamp body is installed.
The following are the dark installation:
1. Reserve a slot
Before installing the concealed magnetic lamp, it is necessary to reserve a suitable slot in the installation position of the lamp. The size and shape of the slot should be determined according to the size and design requirements of the lamp. When reserving slots, pay attention to reserving enough space to facilitate the installation and maintenance of lamps.
2. Fixed tracks
Concealed magnetic lamps need to be fixed on the rails, so the rails need to be fixed at the installation position. Before fixing the track, the position and height of the track should be determined, and fixed according to the size and requirements of the track. When fixing the track, expansion screws or welding can be used to ensure that the track is firm and reliable.
3. Transformer hidden
Concealed magnetic lamps require the use of a transformer to convert voltage, so the transformer needs to be hidden in a suitable location. There is an option to place the transformer inside or outside the fixture, but either way, you need to make sure that the transformer is secure and reliable and does not affect the aesthetics and use of the fixture.
4. Install light fixtures
Install the concealed magnetic lamp on the track and make sure the lamp is secure and reliable. Finally, test the luminaire and the steps are complete.
